Skip to content
Back to blog
Builder licences 6 min read

Do you need referees for a QBCC site supervisor licence?

No referees or years of experience. A QBCC site supervisor application needs the right class, a Low Rise qualification, the $501.46 fee and the current form.

Published

Last reviewed

Check you're on the site supervisor form.

Already chasing referee reports? The site supervisor form doesn't ask for them. Referees belong to the builder contractor application.

Ready to lodge? Match your qualification to the class and use the current site supervisor form.

No. A QBCC site supervisor licence application in Queensland needs evidence of identity and qualifications, according to section 16 of the QBCC Regulation. You don’t need builder referee reports or years of experience.

If you’re collecting forms because a mate needed them for a builder licence, check your licence type first. Start with the role you want to do, then gather the paperwork for that application.

What does a QBCC site supervisor licence let me do?

You personally supervise building work for a licensed contractor, and only while you’re their employee or an officer of their company (section 30B of the QBCC Act). If you’re a subbie invoicing a builder on your own ABN, you aren’t their employee, so this licence won’t cover supervising for them.

The contractor holds the licence for the work. Your site supervisor licence does not authorise you to contract for building work yourself. If you want to quote and sign for your own jobs, read how to get a builder licence in Queensland.

QBCC’s licence-type guide separates the roles. A site supervisor personally supervises on site. A nominee supervisor oversees work for a licensed company as its employee, director or secretary. The licensed contractor enters the building contract.

Under QUEENSLAND · QBCC, a Building contract marked Illustration gives 18 Example Lane, Sampletown, Contractor: Example Building Co and Licence: Builder Low Rise. Its Contractor line is signed and its matching Owner signature line is blank. The signature is labelled Licensed contractor signs the building contract. A Site supervisor licence names Sam Example and says Illustration; its label reads Site supervisor personally supervises the work. A Nominee supervisor licence names Alex Example and says Illustration; its label reads Nominee supervisor oversees the company’s work. Both cards have photos. The takeaway is “You supervise. The contractor signs.”
The contractor’s signature goes on the building contract; your site supervisor licence lets you supervise the work for them.

Why don’t I need builder referees?

The current site supervisor form has sections for personal details, work eligibility, identity, licence classes, technical qualifications, legal eligibility and suitability, interstate or New Zealand licences, and payment. It has no experience or referee section.

Builder referee reports and experience records belong to Builder Low Rise contractor and nominee supervisor applications, and contractors also have financial requirements. Use the qualification and experience guide if you want to contract or become a nominee.

Under QUEENSLAND · QBCC, two Builder Low Rise folders rest on a site desk. The Site supervisor folder contains Application, Identity and Qualification papers. The Builder contractor folder contains Application, Identity and Qualification papers, plus Experience evidence, Builder referee reports and Financial evidence. The forms have filled fields and signatures, the identity cards have photos, and the certificates have seal ribbons. Two signed referee reports are fanned together; the financial statement has a column of figures and a bar chart. Each folder says Illustration. The project rows read 03/24, 06/24 and 09/24; the statement figures read 120, 80 and 40. The takeaway is “Match the evidence to your licence type.”
Builder referee reports sit with the Low Rise contractor evidence; use the site supervisor form for your supervision application.

Already gathering referee reports? Check your next step.

What are the QBCC site supervisor licence requirements?

Section 32AA sets five tests. QBCC must be satisfied that you:

  1. Hold the qualifications required for the licence class.
  2. Can lawfully work in Queensland.
  3. Are not a banned individual.
  4. Are not an excluded or permanently excluded individual.
  5. Are a fit and proper person to hold the licence.

For a site supervisor, QBCC can only look at three things when deciding if you’re fit and proper: tier 1 defective work you’ve done, an unpaid fine debt under the QBCC Act, and an interstate or New Zealand licence that was suspended or cancelled. Answer the form’s suitability questions in full. If any of those apply to you, ask QBCC how it affects your application before you lodge.

The work you supervise must also fit the licence class. For Builder Low Rise, schedule 2 part 4 covers class 1 and 10 buildings, and classes 2 to 9 with a gross floor area up to 2,000 square metres, excluding Type A and Type B construction. It also covers non-structural work on a building of any class or size. Compare Low Rise, Medium Rise and Open before choosing a class.

What qualifications do I need for Low Rise?

You need any one of these, from part 4 of the current Technical Qualifications for Licensing (December 2022):

  • The technical qualification accepted for Builder Low Rise. CPC40120 Certificate IV in Building and Construction is one option; the document lists other accepted routes.
  • Successful completion of all ten listed units: CPCCBC4001, CPCCBC4053, CPCCBC4002, CPCCBC4007, CPCCBC4008, CPCCBC4009, CPCCBC4010, CPCCBC4012, CPCCBC4018 and BSBLDR414.
  • A course or units QBCC considers at least equivalent to that ten-unit set.

Compare the codes on your statement of attainment with the current list before paying for more training. For a later contractor or nominee application, check that application’s qualification requirements separately. Read RPL before a QBCC application if you need a qualification assessment.

How much does a site supervisor licence cost?

From 1 July 2026 to 30 June 2027 (QBCC’s licence fees page):

  • A new applicant pays $250.73 to apply and $250.73 for the first year, totalling $501.46.
  • A current QBCC individual licensee adding a site supervisor class pays $250.73.
  • An optional printed certificate costs $35.18.

The application component is non-refundable if your application is unsuccessful. The fees page separately lists renewal fees of $250.73 for one year and $639.30 for three years.

What should I check before lodging?

Use the checklist in form 01-140 LA SSUP v07 07_26:

  1. Choose the class that covers the work you will supervise.
  2. Attach your relevant qualification and the identity and work-eligibility documents it asks for.
  3. Answer every suitability question and attach the supporting records requested.
  4. Declare your interstate or New Zealand licences and supply any requested decisions.
  5. Complete the payment section. Sign it no more than 30 days before QBCC will receive it, or your application is delayed.

Check occupational licensing separately if your work involves plumbing, drainage, mechanical services, gasfitting or chemical termite management. The form’s occupational-licence notes explain which additional licences apply and when an occupational or contractor licence covers the supervision.

How can BLS help before I lodge?

Builders Licence Success provides application support across every Australian state and territory. For Queensland, we walk you through the licence type, class, qualification and current form so the gaps are sorted before you lodge. Start with our Queensland application support. QBCC assesses every application and makes the decision.

Rather talk it through? Call us on 0468 008 598.

Sources

Official sources checked 17 November 2026.

Frequently asked questions

Do I need referees for a QBCC site supervisor licence?

No. The site supervisor form has no referee section. Section 16 of the QBCC Regulation asks for evidence of identity and qualifications for this licence type.

Section 16

Do I need years of building experience?

Section 32AA sets no years-of-experience requirement for a site supervisor licence. You still need the technical qualification for your class.

Section 32AA

Can I sign building contracts with a site supervisor licence?

No. A site supervisor personally supervises work under a licensed contractor. The contractor holds the licence that allows the business to contract for that work.

QBCC licence types

Is a site supervisor the same as a nominee supervisor?

They are separate licence types. A nominee supervises for a licensed company as its employee, director or secretary. A site supervisor personally supervises under a licensed contractor.

QBCC licence types

What qualification do I need for Low Rise?

Any one of three routes in part 4 of the Technical Qualifications for Licensing (December 2022): the Builder Low Rise qualification, such as CPC40120 Certificate IV in Building and Construction; all ten listed site supervisor units; or a course or units QBCC accepts as at least equivalent to those ten.

Technical qualifications, part 4

How much is a new site supervisor application?

For 1 July 2026 to 30 June 2027, the total is $501.46. That includes the application fee and first-year licence fee. The application component is non-refundable if unsuccessful.

Site supervisor fee schedule

Can I apply for a builder contractor licence later?

Yes. Check the contractor qualification, experience and financial requirements for your class before applying. A site supervisor licence alone does not authorise contracting.

Sections 12 and 16, schedule 2

Start with where
you are.

Get clear on your likely licence, gaps and next step before you pay for training or start pulling the paperwork together.

Check your next step